FAQ

Frequently asked questions

Blue

What is Silk’n Blue?

Silk’n Blue is an electrical face device that destroys acne-causing bacteria for visibly clearer skin. It works with HF™ (Home Fractional) technology.

Is the Silk’n Clear device the same device as Silk’n Blue?

Silk'n Clear is rechargable and Silk'n Blue works with an adaptor. But other than that, the devices are completely the same.

How does it work?

Its light-based treatment works with the combined technology of blue LED light and IR (infrared) Heat radiation, together this is called HF™ (Home Fractional) technology.  This  powerful therapy works like a barrier. It kills the acne-causing bacteria and dries out pimples. It also prevents the skin from forming acne.

Is it suitable for everyone?

It is suitable for both women and men, for all skin types and all skin colours. It is intended for the use of young adults from the age of 12 years, up to the age of 55. This device is not designed for everyone's condition, therefore please read the contraindications in the user manual in its entirety before you start your treatments.

On which areas can it be used?

It can be used on the face and neck.

Is it safe?

Silk'n Blue is safe for use. It is patented and clinically tested. Furthermore it is recommended by dermatologists.

How do I know my skin will not get overheated?

Silk'n Blue has a temperature sensor tip which ensures that the skin’s surface will not rise above 41°C . This built-in safeguard protects your skin from overheating.

Does the treatment hurt?

No. Treatments with Silk'n Blue will not hurt. During a Blue treatment session it is normal to experience and feel a sensation of warmth. This should disappear up to an hour after the session. You may notice a slight reddening of the skin after each Blue session (mild erythema) over the treated area. This is normal and should fade within an hour or two.

How should I use Silk’n Blue?

Hold the applicator against the skin. The blue LED light will activate. You will notice that the temperature will gradually rise. Move the applicator to the infected area and move the device in circular motion. After that, move on to the next infected area, and so on.

How long does a treatment take?

A treatment session should last 4-10 minutes per affected area, depending on the severity of the acne. For isolated acne spots or pimples, it is advisable to treat it for about 4 minutes.

How often should I use it?

Blue is intended to be used twice a week over a period of four weeks (a total of 8 treatments). The expected improvement in the appearance of acne was validated in clinical trials that followed this treatment plan. If necessary, it is optional to use the device over a period greater than 4 weeks.

When can I expect results?

A month after your first treatment you will experience a significant reduction of acne. Please keep in mind that the reaction to the treatment is individual, some may experience an improvement in a earlier stage than others.

DualClean

What is Silk’n DualClean?

Silk’n DualClean is a 2-in-1 small and compact facial cleansing brush. It contains two brush heads: one Regular microfibe brush and one cotton pad holder.

What is the difference between the two brush heads?

The Regular microfibre brush efficiently removes all impurities from the skin by deeply cleansing the pores in the morning. The cotton pad holder, combined with your own cotton pad, removes makeup traces in the evening.

What’s the benefit of using a cotton pad?

The great benefit is that you can separate the brush for cleansing the skin in the morning from your cleansing routine in the evening. This way, your Regular brush will not get dirty with makeup traces. Simply throw the dirty pad away when you are finished removing your makeup.

On which areas can it be used?

DualClean can be used on your forehead, nose, chin, cheeks, nose and neck.

How many settings does it have?

DualClean has 2 settings: low and high.

Do you have to recharge the device?

No. As opposed to many other facial cleansers, DualClean doesn’t need to be recharged.  DualClean works on 2 AA batteries. Perfect for both home-use and traveling.

It is suitable for daily use?

Yes, it is perfect for daily use. However, we recommend you not to use it more than twice a day.

Do you also have other refill brushes?

Silk'n also offers a silicone brush with small studs to provide your skin an invigorating massage.

FaceFX

What is Silk’n FaceFX?

Silk’n FaceFX is the at-home solution for skin rejuvenation with HF™ (Home Fractional) technology. It stimulates collagen production, softens fine lines and wrinkles, improves skin texture, evens out skin tone and reduces pore size.

Is the Silk’n Reju device the same device as Silk’n FaceFX?

Silk'n Reju is rechargable and Silk'n FaceFX works with an adaptor. But other than that, the devices are completely the same.

How does it work?

FaceFX works with HF™ technology by using a combination of red LED light and deep thermal heating. This powerful therapy stimulates multiple layers of your skin and rejuvenates it from the inside out by accelerating blood circulation and stimulating skin cell re-growth and collagen production.

Is it suitable for everyone?

It is suitable for both women and men, for all skin types and all skin colours. This device is not designed for everyone's condition. Therefore, please read the contraindications in the user manual in its entirety before you start your treatments. In our range you will also find the Silk'n FaceFX Men Only device: the same technology for men's skin.

On which areas can it be used?

It can be used on the forehead, cheeks and neck, around the mouth and the eyes (crow’s feet) and under the eyes.

Is it safe?

Silk’n FaceFX is safe for your skin. It has been clinically tested and is also recommended by dermatologists. And as FaceFX is not invasive, it does not work in the same way as laser treatments.

How do I know my skin will not get overheated?

In order to protect your skin, a temperature sensor is embedded in the treatment tip of Silk'n FaceFX. It ensures that the temperature of the skin surface will not exceed 41°C, for a safe and pleasant treatment.

Does the treatment hurt?

No. Treatments with Silk'n FaceFX will not hurt. During a FaceFX treatment session it is normal to experience and feel a sensation of warmth. This should disappear up to an hour after the session. You may notice a slight reddening of the skin after each FaceFX session (mild erythema) over the treated area. This is normal and should fade within an hour or two.

How should I use Silk’n FaceFX?

Place FaceFX against your skin. 24 red LED lights will activate. You will notice that the temperature will gradually rise. Apply light pressure while slowly moving the device in small circular motion over your skin. After that, move on to the treatment zone, and so on.

How long does a treatment take?

Each treatment will take about 15-20 minutes (each treatment zone should be treated for 5-7 minutes). After the first month you can use FaceFX once a week for 15-20 minutes per treatment.

How often should I use it?

For the first month (4 weeks), treatment should be performed 3 times a week.  After the first month you can use FaceFX once a week for 15-20 minutes (maintenance regime).

When can I expect results?

Best results can be expected 3-7 weeks after completing the recommended course of treatment.

FaceFX Men Only

What is Silk’n FaceFX Men Only?

Silk’n FaceFX is the at-home solution for skin rejuvenation with HF™ (Home Fractional) technology. It stimulates collagen production, softens fine lines and wrinkles, improves skin texture, evens out skin tone and reduces pore size.

Is the Silk’n Reju device the same device as Silk’n FaceFX Men Only?

Silk'n Reju is rechargable and Silk'n FaceFX Men Only works with an adaptor. But other than that, the devices are completely the same.

How does it work?

FaceFX Men Only works with HF™ technology by using a combination of red LED light therapy and deep thermal heating. This powerful therapy stimulates multiple layers of your skin and rejuvenates it from the inside out by accelerating blood circulation and stimulating skin cell re-growth and collagen production.

Is it suitable for everyone?

It is suitable for both women and men, for all skin types and all skin colours. This device is not designed for everyone's condition. Therefore, please read the contraindications in the user manual in its entirety before you start your treatments. In our range you will also find the Silk'n FaceFX version in a red colour: the same technology for women's skin.

On which areas can it be used?

It can be used on the forehead, cheeks and neck, around the mouth and the eyes (crow’s feet) and under the eyes.

Is it safe?

Silk’n FaceFX Men Only is safe for your skin. It has been clinically tested and is also recommended by dermatologists. And as FaceFX Men Only is not invasive, it does not work in the same way as laser treatments.

How do I know my skin will not get overheated?

In order to protect your skin, a temperature sensor is embedded in the treatment tip of Silk'n FaceFX. It ensures that the temperature of the skin surface will not exceed 41°C, for a safe and pleasant treatment.

Does the treatment hurt?

No. Treatments with Silk'n FaceFX Men Only will not hurt. During a FaceFX Men Only treatment session it is normal to experience and feel a sensation of warmth. This should disappear up to an hour after the session. You may notice a slight reddening of the skin after each FaceFX Men Only session (mild erythema) over the treated area. This is normal and should fade within an hour or two.

How should I use Silk’n FaceFX Men Only?

Place FaceFX Men Only against your skin. 24 red LED lights will activate. You will notice that the temperature will gradually rise. Apply light pressure while slowly moving the device in small circular motion over your skin. After that, move on to the treatment zone, and so on.

How long does a treatment take?

Each treatment will take about 15-20 minutes (each treatment zone should be treated for 5-7 minutes). After the first month you can use FaceFX once a week for 15-20 minutes per treatment.

How often should I use it?

For the first month (4 weeks), treatment should be performed 3 times a week.  After the first month you can use FaceFX once a week for 15-20 minutes (maintenance regime).

When can I expect results?

Best results can be expected 3-7 weeks after completing the recommended course of treatment.

Facetite

What is Silk’n FaceTite?

Silk’n FaceTite is an anti-aging device that works with HT™ (Home Tightening) technology to reduce wrinkles and tighten the skin. It repairs the skin’s own collagen and elastin fibres and strengthens its deeper layers from the inside out.

How does it work?

The HT™ technology penetrates the skin, seeks out the damaged tissue and repairs it. The warmth exuded by the device stimulates the skin’s renewing properties. Collagen and elastin fibres contract and the skin repairs itself from the inside. On the outside, the skin is visibly more beautiful after each treatment; it looks younger and is noticeably tighter.

Is it suitable for everyone?

It is suitable for both women and men, for all skin types and all skin colours. This device is not designed for everyone's condition. Therefore please read the contraindications in the user manual in its entirety before you start your treatments.

On which areas can it be used?

It can be used on the forehead, cheeks, upper lip, chin, jawline, neck and around the eyes.

Is it safe?

Silk’n FaceTite has been thoroughly tested with the conclusion that it is safe to use in a typical home environment by both men and women. The treatments are effective and the skin immediately feels tighter. Always read the manual carefully before using FaceTite.

Does the treatment hurt?

No. You will only feel a mild sensation of warmth during your treatment. You may also experience some very mild pink-like colouration of the skin during and just after the treatment, which will gradually fade within short.

How should I use Silk’n FaceTite?

For your first treatment, you have to determine which FaceTite energy level is right for you. Spread a thin layer of Slider Gel (included) over the area you intend to treat. Start at energy level 1 for 5 minutes and raise the energy level gradually in order to find the highest energy level that you are still comfortable with. Move the device in linear motions, back and forth an treat each facial area separately.

What does the thermal sensor do?

This built-in heat stabiliser measures the temperature of your skin during treatment. If the thermal sensor measures a temperature above 42°C-43°C, the device will stop emitting heat automatically. Once the skin has cooled down sufficiently the treatment will be continued. This mechanism ensures that your skin will never become overheated.

How long does a treatment take?

The total treatment time for one single treatment zone takes 15 minutes. Start at a low energy level and treat your skin for 5 minutes in order to get used to the heat. After that, you can gradually raise it to the energy level you are still comfortable with. Do this for 10 minutes.It is important that you treat each area individually, one small area of your face at a time. This way the temperature on your skin remains constant. You can see the treatment zones in the diagram showed in the user manual or on the product page of the website xxx

How often should I use it?

In order to give your skin an intensive treatment, you should use the Silk'n Facetite twice a week, for ten weeks. Maintain results by treating once every two weeks.

When can I expect results?

Visible results can be seen after 5 weeks. Best results can be seen after 10 weeks. Keep in mind that results will depend on how consistent the treatment regimen is followed and varies per person.

Why should I apply Slider Gel before each treatment?

Your Silk’n FaceTite comes with a tube of Silk’n Slider Gel. This gel is required to carry out your treatments. It is important that you apply a thin layer of gel on the treatment surface of the device before you start treatment. Without the gel, the device will not work! The water-based gel not only moisturises the skin but also helps to guide the device. It ensures that Silk’n FaceTite glides easily over your skin and prevents your skin from overheating and reddening. Slider Gel is also for sale separately in our webshop.

Flash&Go LUXX

For how long should I continue treatment?

A typical full hair growth cycle may take 18-24 months. During this time multiple sessions are required in order to achieve permanent hair removal. The duration of hair removal sessions varies per person according to their body area, hair colour and how the device is used.

What is Silk’n Flash&Go LUXX?

Silk’n Flash&Go LUXX is a light based hair removal device. It’s able to remove unwanted hair permanently on the body and face with its HPL™ (Home Pulsed Light) technology. This technology is the home version of IPL (Intense Pulsed Light) used in beauty salons.

How does it work?

Light energy is selectively absorbed in the hair shaft and transformed into heat. This disables hair growing cells in the hair follicle. The surrounding tissue remains at normal temperature. The procedure is safe for your skin. After each treatment, hair growth is reduced.

Is it suitable for everyone?

It is suitable for both women and men. For good results and for your own safety, it is important to understand if your hair and skin colour are suitable for treatment with this device. Please view the Hair and Skin Colour chart on this website. You can also find this chart on each packaging. This device is not designed for everyone's condition, therefore please read the contraindications in the user manual in its entirety before you start your treatments.

Is it effective on white, grey or blond hairs?

It works best on darker hair types, or hair that contains more melanin. Melanin is the pigment which gives hair and skin its colour, and it absorbs light energy. Black and dark brown hair have the best outcome, although brown and light brown hair will also respond positively. However, they typically require more hair removal sessions. Red, white, grey and blond may show some response, but may require more treatments.

On which areas can it be used?

It can be used on the body and face, except for nipples and genitals.

Why does it come with 2 or 3 cartridges?

Silk'n Flash&Go LUXX 125,000 has one standard cartridge containing 120,000 light pulses with a treatment area of 4 cm²: ideal for larger body areas. In the packaging you’ll also find a precision cartridge with 5,000 light pulses with a treatment area of 2.5 cm². This one is ideal for smaller areas like the face and bikini line.Silk'n Flash&Go LUXX 245,000 contains 245,000 pulses. Thus, this version contains extra cartridges.

Is it safe?

With Silk’n safety comes first. HPL™ (Home Pulsed Light) technology is able to achieve permanent hair removal results at a fraction of the energy level used in professional light-based hair removal equipment. The low energy used in Silk’n hair removal devices reduces its potential to cause harm or complications, and contributes to your overall safety.  All our HPL™ devices are safe for your skin and eyes. The HPL™ technology has been clinically tested, which resulted in leading dermatologists deeming it to be a safe, convenient and effective hair removal method that can be used in a typical home setting. It is recommended by doctors, is clinically proven and has been cleared by the FDA (Food and Drug Administration) in the United States. All our HPL™ devices have a built-in skin colour sensor to protect your skin and a safety mechanism to protect your eyes and this makes them unique. Cooling gel or protective goggles are not necessary.

Does the treatment hurt?

Most users report feeling a slight sensation of heat and tingling when a light pulse is emitted. Users with thicker and darker hairs may feel slightly more discomfort, but this discomfort subsides once the hair removal session is completed. For your convenience this device has five energy levels that can be set according to sensitivity and tolerance.

What is the Skin Colour Sensor?

This is a built-in safety sensor which stops the device from emitting a light pulse if your skin tone is too dark for treatment. The sensor ensures that your skin is being protected.

How long does a treatment take?

The time can vary depending on the area of the body that is treated. A full leg can take up to 22 minutes and one armpit can take 2 minutes.

How often should I use it?

Typical hair removal plan during a full hair growth cycle: Treatments 1-4 – plan two weeks apart. Treatments 5-7 – plan four weeks apart. Treatments 8 + – treat as needed, until desired results are achieved. Maintenance: from time to time some upkeep may be needed if growth is still visible.

Glide

What is Silk’n Glide?

Silk’n Glide is a light based hair removal device. It’s able to remove unwanted hair permanently on the body and face with its HPL™ (Home Pulsed Light) technology. This technology is the home version of IPL (Intense Pulsed Light) used in beauty salons. Silk'n Glide is available in different versions.

How does it work?

Light energy is selectively absorbed in the hair shaft and transformed into heat. This disables hair growing cells in the hair follicle. The surrounding tissue remains at normal temperature. The procedure is safe for your skin. After each treatment, hair growth is reduced.

Is it suitable for everyone?

It is suitable for both women and men. For good results and for your own safety, it is important to understand if your hair and skin colour are suitable for treatment with this device. Please view the Hair and Skin Colour chart on this website. You can also find this chart on each packaging. This device is not designed for everyone's condition, therefore please read the contraindications in the user manual in its entirety before you start your treatments.

Is it effective on white, grey or blond hairs?

It works best on darker hair types, or hair that contains more melanin. Melanin is the pigment which gives hair and skin its colour, and it absorbs light energy. Black and dark brown hair have the best outcome, although brown and light brown hair will also respond positively. However, they typically require more hair removal sessions. Red, white, grey and blond may show some response, but may require more treatments.

On which areas can it be used?

It can be used on the body and face, except for nipples and genitals.

Is it safe?

With Silk’n safety comes first. HPL™ (Home Pulsed Light) technology is able to achieve permanent hair removal results at a fraction of the energy level used in professional light-based hair removal equipment. The low energy used in Silk’n hair removal devices reduces its potential to cause harm or complications, and contributes to your overall safety. All our HPL™ devices are safe for your skin and eyes. The HPL™ technology has been clinically tested, which resulted in leading dermatologists deeming it to be a safe, convenient and effective hair removal method that can be used in a typical home setting. It is recommended by doctors, is clinically proven and has been cleared by the FDA (Food and Drug Administration) in the United States. All our HPL™ devices have a built-in skin colour sensor to protect your skin and a safety mechanism to protect your eyes and this makes them unique. Cooling gel or protective goggles are not necessary.

Does the treatment hurt?

Most users report no pain at all or just feeling a slight sensation of heat and tingling when a light pulse is emitted. Users with thicker and darker hairs may feel slightly more discomfort, but this discomfort subsides once the hair removal session is completed. For your convenience this device has five energy levels that can be set according to sensitivity and tolerance.

What is the Skin Colour Sensor?

This is a built-in safety sensor which stops the device from emitting a light pulse if your skin tone is too dark for treatment. The sensor ensures that your skin is being protected.

How long does a treatment take?

The time can vary depending on the area of the body that is treated. A full leg can take up to 22 minutes and one armpit can take 2 minutes. Do you want to remove hair quickly? The Gliding method is unique and ultra-fast. Silk’n Glide can produce individual light pulses at automatic intervals. With this method you can simply glide the device over your skin.

How often should I use it?

Typical hair removal plan during a full hair growth cycle: Treatments 1-4 – plan two weeks apart. Treatments 5-7 – plan four weeks apart. Treatments 8 + – treat as needed, until desired results are achieved. Maintenance: from time to time some upkeep may be needed if growth is still visible.

Why doesn't the device emit a light pulse sometimes?

Make sure that your skin colour is right for treatment. Some areas of your skin can be darker and thus not suitable for treatment. Also make sure that the treatment surface and the Skin Colour Sensor are fully attached to your skin.

For how long should I continue treatment?

A typical full hair growth cycle may take 18-24 months. During this time multiple sessions are required in order to achieve permanent hair removal. The duration of hair removal sessions varies per person according to their body area, hair colour and how the device is used.

Infinity

What is Silk’n Infinity?

Silk’n Infinity is a light based hair removal device. It’s able to remove unwanted hair permanently on the body and face with its eHPL™ technology. This is a new technology to remove unwanted hair and works with Galvanic and Optical Energy.

How do I activate eHPL™ technology?

eHPL™ technology is emitted from the device in the form of a light pulse. This is achieved in a very special way: the energy is delivered through an electrode plate located near the treatment area at the rear of the device. To activate eHPL™ technology, all you have to do is lightly touch the electrode plate with your fingers and hold the device on the desired treatment area at the same time. Hold the device with one hand, with your fingers touching both the front (the light pulse button) and the back (the electrode plate). When you press the light pulse button, the pulses of eHPL™ technology (Galvanic and Optical Energy) are automatically emitted to the treatment surface (the glass pane) in order to remove hairs. You can also watch the video on the product page of this website to see the above in motion.

Is it suitable for everyone?

It is suitable for both women and men. New about the Silk'n Infinity system is that it is suitable for all skin colours and almost all hair colours. Even the darkest skin tone can be treated. For more details, please view the Hair and Skin Colour chart on this website. You can also find this chart on each packaging. This device is not designed for everyone's condition, therefore please read the contraindications in the user manual in its entirety before you start your treatments.

Is it effective on white, grey or blond hairs?

Silk'n Infinity is suitable for all skin colours and almost all hair colours. Today, only the darkest skin tone in combination with white or grey hair is not suitable for treatment.

Can I treat myself if I have a suntanned skin or after exposure to the sun?

You are not allowed to use Silk'n Infinity if you have suntanned skin or when you recently have been exposed to the sun. Do you have suntanned skin and are you still eager to use Home Pulsed Light hair removal? Then, we recommend you to use Silk’n Glide. This is a different type of device made by Silk’n. More information on Silk’n Glide can be found on the website

On which areas can it be used?

It can be used on the body and face.

Is it safe?

With Silk’n safety comes first. eHPL™ technology is able to achieve permanent hair removal results at a fraction of the energy level used in professional light-based hair removal equipment. The low energy used in Silk’n hair removal devices reduces its potential to cause harm or complications, and contributes to your overall safety. As with other Silk’n hair removal products, Silk’n Infinity 400,000 was tested for safety and effectiveness, and has been clinically proven. These studies showed that Infinity can be used safely in a typical home environment. Dermatologists also recommend using Infinity.

Does the treatment hurt?

Most users report no pain at all or just feeling a slight sensation of heat and tingling when a light pulse is emitted. Users with thicker and darker hairs may feel slightly more discomfort, but this discomfort subsides once the hair removal session is completed. For your convenience this device has five energy levels that can be set according to sensitivity and tolerance.

What is the Skin Colour Sensor?

This is a built-in safety sensor which stops the device from emitting a light pulse if your skin tone is too dark for treatment. The sensor ensures that your skin is being protected.

How long does a treatment take?

The time can vary depending on the area of the body that is treated. Do you want to remove hair quickly? Silk’n Infinity can produce individual light pulses at automatic intervals. This Gliding method is unique, ultra-fast and you can simply glide the device over your skin. With this method a full-body treatment takes less than 20 minutes.

How often should I use it?

Typical hair removal plan during a full hair growth cycle: Treatments 1-4 – plan two weeks apart. Treatments 5-7 – plan four weeks apart. Treatments 8 + – treat as needed, until desired results are achieved. Maintenance: from time to time some upkeep may be needed if growth is still visible.

Why doesn't the device emit a light pulse sometimes?

Make sure that your skin colour is right for treatment. Also make sure that the treatment surface and the Skin Colour Sensor are fully attached to your skin.

MicroNail

What is Silk’n MicroNail?

Silk’n MicroNail is an electrical nail polisher/buffer that provides your nails an ultra-glossy shine in minutes without using any actual nail polish.

Why not use a manual buffer?

Buffing nails manually, using a classic nail buffer, takes time and effort. You have to go over the nail several times using different kinds of files until you get the required result. You also run the risk of nails becoming brittle if you manually buff in both directions across the nail. Because Silk’n MicroNail is fully electric, it takes the work literally out of your hands.

How does it work?

MicroNail comes with 2 different rollers: a grey Micro Smooth Roller and a white Micro Shine Roller. Start with the grey roller to smooth out dents and ridges and to make the nail beautifully smooth. Use the white roller right after to give the nails a fabulous, natural gloss which will stay for about two weeks. Just easily glide over your nails, the device will do the work.

How long does a treatment take?

A complete treatment will take less than 2 minutes

How long will my nails shine?

They will shine up to 2 weeks after one single treatment.

How often can I use the rollers?

Silk'n recommends you to use the grey roller not more than once every 2 weeks. The white roller can be used when needed.

Do you have to recharge the device?

No, MicroNail works on 2 AA batteries. Ideal to take it anywhere with you.

Can I use nail polish?

The shine that MicroNail provides your nails with, makes nail polish unnecessary. But if you do decide to polish your nails, you’ll notice that polishing becomes much easier than before. This is because the entire surface of the nail is even, thanks to MicroNail.

Is it also suitable for toenails?

Yes. it is absolutely suitable for both fingernails and toenails.

MicroPedi

What is Silk’n MicroPedi?

Silk’n MicroPedi is an electric callus remover. It removes calluses and hard skin on feet within seconds. It comes in different versions, e.g. MicroPedi Regular and MicroPedi Instant & Express.

What is the difference between al the available MicroPedi's?

• MicroPedi Classic: comes with 2 Original rollers Fine & Medium, 4 cm. • MicroPedi Lady: comes with 2 Original rollers Fine & Medium, 4 cm. • MicroPedi Sport: comes with 2 Original rollers Medium & Coarse, 4 cm. • MicroPedi Instant&Express: comes with 2 Instant&Express rollers Fine & Medium, 4 cm. Please note, these rollers will not fit on any other MicroPedi device.

How does it work?

Before you start, make sure your feet are clean and dry. After that, simply put a roller in the MicroPedi device, turn it on and bring the device to your feet. Gently move the device over the calloused or thickened skin (moving forwards, backwards and/or sideways) for a few seconds. After you finish the treatment, rinse the skin with water or use a wet towel to remove the dead skin cells.

Why should I use an electrical callus remover?

Because it is much safer than metal scrapers and more effective than a pumice stone. Also, metal scrapers can painfully cut and injuire your skin.

Do you have to recharge the device?

No, MicroPedi works on 2 AA batteries. Ideal to take it with you when you are traveling.

Revit

What is Silk’n ReVit?

Silk’n ReVit is a diamond peeling microdermabrasion system for home use that has many benefits. It is able to improve skin texture, soften fine lines, remove dead skin cells and blur age spots, irregularities in the skin and acne scars.

How does it work?

Diamond peeling is an advanced form of microdermabrasion. The treatment removes the outer layer of the skin using light abrasion, which promotes the growth of healthy new cells. The vacuum suction of the Silk'n ReVit device also increases blood flow. This makes the skin vital. ReVit has a diamond tip that is 100% crystal-free.

Is it suitable for everyone?

It is suitable for both women and men, for all skin types and all skin colours. This device is not designed for everyone's condition, therefore please read the contraindications in the user manual in its entirety before you start your treatments.

On which areas can it be used?

It can be used on the forehead, cheeks, nose, chin, around the eyes, around the lips, neck and hands.

Is it safe?

Silk’n ReVit has been tested with the conclusion that it is safe to use in a typical home environment by both men and women. The treatments are effective. Always read the user manual carefully before using ReVit.

Does the treatment hurt?

No. Treatments with Silk'n ReVit do not hurt. You may experience some redness or skin sensitivity after treatment. This is absolutely normal. The feeling will quickly subside.

How should I use Silk’n ReVit?

Place a filter in the device (included). Next, select one of three diamond tip attachment heads (Precision, Fine or Coarse). Turn on the device and chooce between 2 settings: low or high. Start your first treatment on the lowest setting with the Fine tip. Rub the tip against the skin and stroke it in linear motions over your face (view the treatment zones image in the user manual or on the product page of the website). Enhanced by vacuum stimulation, this action scaures off the old, dull topmost layer of skin revealing the underlying, new skin which looks radiant, healthy and revitalized.

How long does a treatment take?

This depends on how many treatment areas you intend to treat. Each treatment area should be treated for about 5 minutes.

How often should I use it?

The best results will come from using it once or twice per week.

When can I expect results?

The initial results can be seen immediately after treatment. The skin feels smoother and look brighter. With time, there should be a notable improvement in age spots, pores size, acne scars and fine lines.

Should I do anything after treatment?

Wash your face with cold water. Then apply moisturizer to soothe the skin. To protect recently treated skin when exposed to sunlight, be sure to thoroughly apply sunscreen SPF 30 or higher.

What is the difference between each diamond tip?

The Fine tip is to start your first treatment with and can be used for each treatment that follows. If your skin requires more intensive peeling you can select the Coarse attachment. The Precision attachment can be used for the small areas around the nose and the corners of your eyes.

Silhouette

What is Silk’n Silhouette?

Silk’n Silhouette is an innovative appliance for home use that works with HT™ (Home Fractional) technology. It can reduce cellulite, streamline your body contours, tighten your skin and improve your skin’s elasticity.

How does it work?

Silhouette is based on HT™ technology that combines three energy sources: Bi-Polar RF Energy, LED Light Energy and IR Heat Energy. The three energy sources join forces, penetrating and heating all layers of the skin, from the epidermis to the sub-dermal fat. This causes fibres in the skin complex to contract. Silhouette tackles the problem from the inside out. Skin is visibly tighter, looks younger and feels rejuvenated.

Is it suitable for everyone?

It is suitable for both women and men, for all skin types and all skin colours. This device is not designed for everyone's condition. Therefore, please read the contraindications in the user manual in its entirety before you start your treatments.

On which areas can it be used?

Suitable for use on all parts of the body, e.g. buttocks, upper arms, hips, inner and outer thighs, belly, back, thorax, calf.

Is it safe?

Silk’n Silhouette is recommended by physicians and dermatologists and has been approved by medical regulatory bodies. Just like all other Silk’n products, Silhouette has undergone clinical trials conducted on various parts of the body. They concluded that treatments are brief, safe and produce results.

What does the thermal sensor do?

This is a built-in heat stabiliser that measures the temperature of your skin during treatment. If the thermal sensor measures a temperature above 42°C-43°C, the device will stop emitting heat automatically. Once the skin has cooled down sufficiently the treatment will be continued. This mechanism ensures that your skin will never become overheated.

Does the treatment hurt?

No. Treatments with Silk'n Silhouette will not hurt. During a Silhouette treatment session it is normal to experience a mild sensation of warmth and it is not uncommon to see some very mild, pink-like coloration of the skin. This should disappear up to an hour after the session.

How should I use Silk’n Silhouette?

Spread a thin layer of Silk'n Slider Gel (included) on the designated treatment area. Alternatively, spread a moderate amount of gel on the device’s treatment surface. For your first treatment start with the lowest energy level (1). From the second treatment and up, you can move on to treat on the medium (2) and highest energy level (3). Place the device on the designated skin area. You will feel a mild sensation of warmth. Move the device in gentle massage-like linear motions over the area. View the instructional images in the user manual or watch the video on the product page of the website to see the instructions in motion.

How long does a treatment take?

For the best results, maintain an average treatment time of 20 minutes per treatment area. During your first treatment, please treat the designated area for 20 minutes on the lowest energy level (1). From the second treatment and up, you can move on to treat with the medium and high energy level for 20 minutes per treatment area.

How often should I use it?

To give your body an intensive treatment, start with sessions twice a week for 10 weeks. After 10 weeks you can use Silhouette once every two weeks (maintenance regime)

When can I expect results?

First results will be visible after completing the recommended treatment plan in 10 weeks.

Why should I apply Slider Gel before each treatment?

Your Silk’n Silhouette comes with a tube of Silk’n Slider Gel. It is important that you apply a thin layer of gel to your skin before you start your treatment. Without the gel, the device will not work! The water-based gel not only moisturises but also helps to guide the device. It ensures that Silk’n Silhouette makes contact with the skin, makes it easier to glide over your skin and prevents your skin from overheating. After a few minutes the Slider gel will dry up and you will need to apply some extra Sliger gel. Silk'n Slider Gel is also for sale in our webshop.

SonicClean

What is Silk’n SonicClean?

Silk’n SonicClean is an electrical facial cleansing brush to delicately clean the skin. It removes impurities and makeup traces effortlessly. It comes with 2 Regular microfibre bushes.

Why should I prefer an electrical face brush?

When you cleanse your skin and remove makeup with your hands, your skin is not cleansed optimally. Traces of makeup are still left behind in the skin pores. SonicClean is different. It removes 6x more makeup than with hands alone and provides you a deep-cleansing treatment.

On which areas can it be used?

SonicClean can be used on your forehead, chin, cheeks, nose and neck.

How many settings does it have?

The device has a vibrating function in 2 speed settings (low and high).

What is the difference between Silk'n SonicClean and Silk'n SonicClean Plus?

SonicClean has one function, vibrating, in two speed settings. SonicCleanPlus offers 2 functions: vibrating and pulsating. Both functions have 2 speed settings: low and high.

How many times can I use SonicClean on one full charge?

This device can be used up to 120 times on one single charge. A great benefit compared to other brands in the market.

How do I use it?

Splash your face with lukewarm water and make the brush of your device wet. Apply a drop of face cleansing lotion onto the brush head; you may use any face cleansing lotion you like. Move the device slowly over the different facial areas in an upward, circular motion. Cleanse every area (forehead, nose, chin, left cheek, right cheek, neck) no more than 10 seconds.

How long does one cleansing treatment take?

One cleansing treatment will take no more than 1 minute. SonicClean also has an auto shut-off timer which allows the device to shut off automatically after one minute, indicating the end of your cleansing treatment. This allows you not to exceed the maximum treatment time and prevents you from irritated skin.

Does it work on batteries?

No, SonicClean does not work on batteries. It comes with an adaptor which charges the device in a few hours. On a full charge SonicClean can be used up to 120 times.

It is suitable for daily use?

Yes, it is perfect for daily use. However, we recommend you not to use it more than twice a day.

SonicClean Men Only

What is Silk’n SonicClean Men Only?

Silk’n SonicClean Men Only is an electrical facial cleansing brush to delicately clean the skin. Its sonic technology removes impurities, dirt and sweat immediately. It comes with 2 Regular microfibre bushes.

Why should I prefer an electrical face brush?

Washing your face with your hands, using nothing but soap and water, often fails to really deeply cleanse your pores and causes impurities to build up. The result: a dull complexion with pimples, blackheads and other skin irritations. This deep cleansing facial brush will wash your skin perfectly and leave it deeply cleansed and energised. In addition, Silk'n recommends this device as a pre-shaving method to soften and lift stubbles for a more comfortable shave.

On which areas can it be used?

SonicClean Men Only can be used on your forehead, chin, cheeks, nose and neck.

How many settings does it have?

The device has two functions: vibrating and pulsating. Both functions have 2 speed settings: low and high.

How many times can I use SonicClean Men Only on one full charge?

This device can be used up to 120 times on one single charge. A great benefit compared to other brands in the market.

How do I use it?

Splash your face with lukewarm water and make the brush of your device wet. Apply a drop of face cleansing lotion onto the brush head; you may use any face cleansing lotion you like. Choose the desired setting and move the device slowly over the different facial areas in an upward, circular motion. Cleanse every area (forehead, nose, chin, left cheek, right cheek, neck) no more than 10 seconds.

How long does one cleansing treatment take?

One cleansing treatment will take no more than 1 minute. SonicClean Men Only also has an auto shut-off timer which allows the device to shut off automatically after one minute, indicating the end of your cleansing treatment. This allows you not to exceed the maximum treatment time and prevents you from irritated skin.

Does it work on batteries?

No, SonicClean Men Only does not work on batteries. It comes with an adaptor and a charging cradle. Simply place the device in the cradle and connect the cradle to the adapter. SonicClean Men Only will have to charge for a few hours. On a full charge the device can be used up to 120 times.

It is suitable for daily use?

Yes, it is perfect for daily use. However, we recommend you not to use it more than twice a day.

Do you also have other brushes?

Silk'n also offers a silicone brush with small studs to provide your skin an invigorating massage.

SonicClean Plus

What is Silk’n SonicClean Plus?

Silk’n SonicClean Plus is an electrical facial cleansing brush to delicately clean the skin.  It removes impurities and makeup traces effortlessly. It comes with 2 Regular microfibre brushes.

Why should I prefer an electrical face brush?

When you cleanse your skin and remove makeup with your hands, your skin is not cleansed optimally. Traces of makeup are still left behind in the skin pores. SonicClean Plus is different. It removes 6x more makeup than with hands alone and provides you a deep-cleansing treatment.

On which areas can it be used?

SonicClean Plus can be used on your forehead, chin, cheeks, nose and neck.

How many settings does it have?

The device has two functions: vibrating and pulsating. Both functions have 2 speed settings: low and high.

What is the difference between Silk'n SonicClean Plus and Silk'n SonicClean?

SonicCleanPlus offers 2 functions: vibrating and pulsating. Both functions have 2 speed settings: low and high. SonicClean had one function, vibrating, in two speed settings.

How many times can I use SonicClean Plus on one full charge?

This device can be used up to 120 times on one single charge. A great benefit compared to other brands in the market.

How do I use it?

Splash your face with lukewarm water and make the brush of your device wet. Apply a drop of face cleansing lotion onto the brush head; you may use any face cleansing lotion you like. Choose the desired setting and move the device slowly over the different facial areas in an upward, circular motion. Cleanse every area (forehead, nose, chin, left cheek, right cheek, neck) no more than 10 seconds.

How long does one cleansing treatment take?

One cleansing treatment will take no more than 1 minute. SonicClean Plus also has an auto shut-off timer which allows the device to shut off automatically after one minute, indicating the end of your cleansing treatment. This allows you not to exceed the maximum treatment time and prevents you from irritated skin.

Does it work on batteries?

No, SonicClean Plus does not work on batteries. It comes with an adaptor and a charging cradle. Simply place the device in the cradle and connect the cradle to the adapter. SonicClean Plus will have to charge for a few hours. On a full charge SonicClean Plus can be used up to 120 times.

It is suitable for daily use?

Yes, it is perfect for daily use. However, we recommend you not to use it more than twice a day.